LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Emission Control System) >> Evaporative Emissions >> EVAP/Purge Solenoid >> Removal >> 2.4L Turbo

2.4L Turbo

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EVAP Purge Solenoid Location - 2.4L Turbo
GC0021742Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove solenoid from mounting bracket by pressing tab and pulling of the solenoid from bracket.
    Fig 2: EVAP Purge Solenoid - 2.4L Turbo
    GC0021743Courtesy of DAIMLERCHRYSLER CORP.
    1 - Electrical Connector
    2 - Vacuum Lines
  3. Unlock and disconnect the electrical connector from the purge solenoid (1).
  4. Remove the 2 vacuum lines (2).
  5. Remove solenoid.
scientia non olet · About LEMON Manuals