LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Emission Control System) >> Evaporative Emissions >> EVAP/Purge Solenoid >> Removal >> 1.6/2.0L

EVAP/Purge Solenoid: Removal: 1.6/2.0L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the negative battery cable.
  2. Remove solenoid from bracket by pulling up on solenoid.
  3. Disconnect electrical connector from solenoid.
  4. Disconnect vacuum tubes from solenoid.
scientia non olet · About LEMON Manuals