LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Ignition System (Service Information)) >> Sensor-Camshaft Position >> Removal >> 2.0/2.4L

Sensor-Camshaft Position: Removal: 2.0/2.4L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Target Magnet Removal/Installation - 2.0/2.4L
GC0019915Courtesy of DAIMLERCHRYSLER CORP.
1 - CAM MAGNET/TARGET
2 - CAMSHAFT POSITION SENSOR
  1. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
  2. Remove the negative battery cable.
  3. Disconnect electrical connector from camshaft position sensor (2).
  4. Remove camshaft position sensor mounting screws. Remove sensor.
  5. Loosen screw attaching target magnet to rear of camshaft (1).
scientia non olet · About LEMON Manuals