LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Ignition System (Service Information)) >> Sensor-Camshaft Position >> Removal >> 1.6L

Sensor-Camshaft Position: Removal: 1.6L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Sensor Location - 1.6L
GC0022900Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Relocate the power steering return hose.
  3. Disconnect the electrical connector from the camshaft sensor.
  4. Remove 1 screw from sensor.
  5. Remove sensor.
scientia non olet · About LEMON Manuals