Specifications - Fluid Capacities
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | SPECIFICATION |
|---|---|
| Fuel Tank - V6 Engine | 68 L (18 gal.) |
| Fuel Tank - V8 Engine | 72 L (19 gal.) |
| Engine Oil* - 2.7L | 5.7L (6.0 qts.) |
| Engine Oil* - 3.5L | 5.7L (6.0 qts.) |
| Engine Oil* - 5.7L | 6.6 L (7.0 qts.) |
| Engine Oil* - 6.1L | 6.6 L (7.0 qts.) |
| Cooling System - 2.7L** | 9.2 L (9.7 qts.) |
| Cooling System - 3.5L** | 10.0 L (10.6 qts.) |
| Cooling System - 5.7L** | 13.8 L (14.6 qts.) |
| Cooling System - 6.1L** | 14.0 L (14.8 qts.) |
| *(includes filter) | |
| **(includes heater and coolant recovery bottle filled to MAX level) | |
| AUTOMATIC TRANSMISSION | |
| Service Fill - NAG1 | 5.0 L (10.6 pts.) |
| Overhaul Fill - NAG1 | 7.7 L (16.3 pts.) |
| Service Fill - 42RLE | 3.8L (4.0 qts) |
| Overhaul Fill - 42RLE | 8.3L (17.6 pts) |
| Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. (Refer to STANDARD PROCEDURE for 42RLE Automatic Transmission or STANDARD PROCEDURE for NAG1 Automatic Transmission) | |
| TRANSFER CASE | |
| MS140 | 0.6L (1.3 pts.) |
| AXLE - FRONT | |
| 175MM FIA Axle | 600 ml (0.63 qts) |
| AXLE - REAR | |
| 198 MM RII Axle | 1.4L (1.5 qts.) |
| 210 MM RII Axle | 1.6L (1.7 qts.) |