LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition Control (Service Information) >> PLUG, Glow >> Removal >> Removal

PLUG, Glow: Removal: Removal

CAUTION: Engine temperature must be at least 90.°C (194.°F) before removing glow plugs. If cylinder head is already removed, warm cylinder head to 90.°C (194.°F) before removing glow plugs.
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Disconnect glow plug electrical connector (1).
    WARNING: Risk of injury to skin and eyes from handling hot or glowing objects. Wear protective gloves, clothing and eye wear.
  4. Clean glow plug bay.
  5. Remove glow plugs.
scientia non olet · About LEMON Manuals