LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.5L Engine (Service Information) >> Valve Timing >> TENSIONER, Engine Timing >> Inspection >> TENSIONER Pulley Assembly

TENSIONER Pulley Assembly

Fig 1: TENSIONER PULLEY
GC0095562Courtesy of CHRYSLER LLC
1 - TENSIONER PULLEY
2 - PIVOT BOLT
3 - TENSIONER BRACKET
NOTE: The tensioner pulley (1), bracket (3), and pivot bolt (2) is serviced as an assembly.
  1. Inspect pulley (1) for free movement. Replace if pulley is loose, seized, or rough turning.
  2. Inspect pulley bearing and seal. Replace if damaged.
  3. Inspect pivot bolt (2) for free movement in assembly housing. Replace assembly if seized or excessive looseness.
scientia non olet · About LEMON Manuals