Camshaft Sprockets

Fig 1: RIGHT CAMSHAFT SPROCKET

Courtesy of CHRYSLER LLC

1 - LOOSENED ROCKER ASSEMBLY

2 - RIGHT CAMSHAFT TDC

CAUTION: The 3.5L engine is NOT a free-wheeling design. Therefore, care should be taken not to rotate the camshafts or crankshaft with the timing belt removed.

NOTE: The camshaft timing gears are keyed to the camshaft.

Remove timing belt. See Engine/Valve Timing/BELT and SPROCKETS, Timing - Removal .
Hold the right camshaft sprocket with a 36 mm (1 7/16 in.) box end wrench so that the timing mark (2) does not move while removing the retaining bolt.
Loosen and remove the camshaft gear retaining bolt and washer. The right bolt is 213 mm (8 3/8 in.) long.
NOTE: The camshaft timing gears are keyed to the camshaft.
Remove the right camshaft sprocket.

Fig 2: LEFT CAMSHAFT SPROCKET
Courtesy of CHRYSLER LLC

1 - LEFT CAMSHAFT TDC

2 - LOOSENED ROCKER ASSEMBLY
Hold the left camshaft sprocket with a 36 mm (1 7/16 in.) box end wrench so that the timing mark (1) does not move while removing the retaining bolt.
Loosen the left camshaft gear retaining bolt.

Fig 3: Radiator Fan Assembly
Courtesy of CHRYSLER LLC
Remove the grill closure panels (1).

Fig 4: Upper Radiator Mounting Bolts
Courtesy of CHRYSLER LLC
Loosen the upper radiator mounting bolts (1) and (2).
Reposition the radiator/condensor forward and remove the left camshaft gear retaining bolt and washer. The left bolt is 255 mm (10.0 in.) long.
NOTE: The camshaft timing gears are keyed to the camshaft.
Remove the left camshaft sprocket.