LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.5L Engine (Service Information) >> Engine Block >> Crankshaft >> Standard Procedure >> Measuring Crankshaft End Play

Measuring Crankshaft End Play

Fig 1: CRANKSHAFT END PLAY TYPICAL
GC0095521Courtesy of CHRYSLER LLC
  1. Mount a dial indicator to front of engine with the locating probe on nose of crankshaft.
  2. Move crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move crankshaft all the way to the front and read the dial indicator. Crankshaft end play must be within specification. See Engine - Specifications .
scientia non olet · About LEMON Manuals