LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System >> CONVERTER, Catalytic >> Removal >> Right Hand Catalytic Converter

Right Hand Catalytic Converter

Fig 1: RIGHT HAND CATALYTIC CONVERTER
GC0080336Courtesy of CHRYSLER LLC
1 - FLANGE NUTS
2 - DOWNSTREAM OXYGEN SENSOR
3 - FRONT EXHAUST PIPE W/CATALYTIC CONVERTER
4 - CATALYTIC CONVERTER
  1. Disconnect negative battery cable.
  2. Raise vehicle on hoist.
  3. Disconnect downstream oxygen sensor (2) connectors.
  4. Remove muffler and resonator. See Exhaust System/MUFFLER, Exhaust - Removal .
    Fig 2: CATALYTIC CONVERTER BRACE
    GC0080337Courtesy of CHRYSLER LLC
    1 - LH CATALYTIC CONVERTER
    2 - BRACE
    3 - RH CATALYTIC CONVERTER
  5. 2.7L/3.5L engine only - Remove nuts and cross-brace (2).
  6. Remove catalytic converter to ball flange nuts (1).
  7. Remove catalytic converter (3).
scientia non olet · About LEMON Manuals