LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System >> CONVERTER, Catalytic >> Removal >> Left Hand Catalytic Converter

Left Hand Catalytic Converter

Fig 1: LH CATALYTIC CONVERTER
GC0080046Courtesy of CHRYSLER LLC
1 - OXYGEN SENSOR
2 - OXYGEN SENSOR CONNECTOR
3 - BALL FLANGE NUT
4 - LH CATALYTIC CONVERTER
  1. Raise vehicle on hoist.
  2. Hoist vehicle.
  3. Disconnect downstream oxygen sensor electrical connectors.
  4. Remove muffler and resonator assembly. See Exhaust System/MUFFLER, Exhaust - Removal .
  5. Remove ball flange nuts.
  6. Remove catalytic converter ball flange nut.
  7. Remove catalytic converter.
scientia non olet · About LEMON Manuals