LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Cluster (Service Information) >> POD, Switch >> Installation >> Installation

POD, Switch: Installation: Installation

Fig 1: Screws
GC0080097Courtesy of CHRYSLER LLC
  1. Place the switch pod in the bezel opening and install the two screws (1).
  2. Install the instrument panel center bezel. Refer to Body/Instrument Panel/BEZEL, Instrument Panel - Installation .
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals