LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Differential & Driveline >> Propeller Shaft >> Removal >> Front

Propeller Shaft: Removal: Front

Fig 1: Heat Shield Removal/Installation
GC0081119Courtesy of CHRYSLER LLC
1 - HEAT SHIELD
  1. Place gearshift lever in NEUTRAL and raise vehicle on hoist.
  2. Remove propeller shaft heat shield.
    Fig 2: Front Propeller Shaft Removal/Installation
    GC0094956Courtesy of CHRYSLER LLC
    1 - PROPELLER SHAFT ASSEMBLY
    2 - BOLTS
  3. Apply alignment index marks on the propeller shaft and front axle flanges.
  4. Remove and discard four front propeller shaft-to-axle flange bolts (2).
  5. Apply alignment index marks on the propeller shaft and transfer case flanges.
  6. Remove and discard four front propeller shaft-to-transfer case flange bolts (2).
  7. Remove propeller shaft assembly (1).
scientia non olet · About LEMON Manuals