Left Axle Seal

Fig 1: Differential and Seal Removal/Installation

Courtesy of CHRYSLER LLC

Using Installer L-4507, install left (inboard) axle seal (2).
Install differential (3) . Install cover (5) with new o-ring seal (4).
Install and torque cover-to-housing bolts to:
- M10x40 - 65 N.m (48 ft. lbs.)
- M8x25 - 34 N.m (25 ft. lbs.)
Fig 2: Fluid Fill Plug Location
Courtesy of CHRYSLER LLC
Install axle assembly into vehicle. See Differential and Driveline/Front Axle - Installation
Fill axle (1) with 600ml (0.64 qts.) Mopar® 75W-90 Synthetic Gear Lubricant. Torque fill plug (1) to 30 N.m (22 ft. lbs.)