LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Differential & Driveline >> Front Axle >> DISCONNECT, Front Axle >> Removal >> Front Axle Disconnect

Front Axle Disconnect

  1. Raise and support the vehicle.
    Fig 1: LEFT DRIVE AXLE AND INTERMEDIATE SHAFT
    GC0081408Courtesy of CHRYSLER LLC
    NOTE: The intermediate shaft is serviced only as a complete assembly.
  2. Remove left halfshaft assembly (2). See Differential and Driveline/Half Shaft - Removal 
    Fig 2: Front Axle Disconnect Solenoid Harness Connector
    GC0095013Courtesy of CHRYSLER LLC
  3. Disconnect the front axle disconnect solenoid harness connector (1).
    Fig 3: Bolts From Front Axle Disconnect Solenoid
    GC0095014Courtesy of CHRYSLER LLC
  4. Remove the 3 bolts (5), (6), (7) from the front axle disconnect solenoid, and remove the front axle disconnect solenoid (8).
    Fig 4: Bolts From Front Axle Disconnect Bracket
    GC0095015Courtesy of CHRYSLER LLC
  5. Remove the 3 bolts (1), (2), (3) from the front axle disconnect bracket, and remove the front axle disconnect bracket (4).
    Fig 5: Bolts From Front Axle Disconnect Solenoid
    GC0095014Courtesy of CHRYSLER LLC
  6. Remove four bolts (1) from the front axle disconnect (3) and remove it from from the engine
scientia non olet · About LEMON Manuals