Diagnostic Test

VERIFY DTC IS ACTIVE
1. Turn the ignition on.
2. Using a scan tool, read and record DTCs.
3. Using a scan tool, read and record Environmental Data (EV Data).
4. Using a scan tool, erase DTCs.
5. Cycle the ignition switch.
6. Using a scan tool, read DTCs.
  Does this DTC reset?
  
  Yes
  - Replace the Dynamics Sensor in accordance with the Service Information.
  - Perform ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure .
  No
  - Perform the ABS INTERMITTENT CONDITION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure .