LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Mechanical Brake System - Base (Service Information) >> Parking Brake >> SHOES, Parking Brake >> Adjustments >> Parking Brake Shoe Adjustment >> Preliminary Adjustment

Preliminary Adjustment

  1. Remove rear brake rotor. See Brakes/Hydraulic/Mechanical/ROTOR, Brake - Removal .
    Fig 1: Measuring Parking Brake Drum Diameter
    GC0095178Courtesy of CHRYSLER LLC
  2. Using Brake Shoe Gauge, Special Tool C-3919, or equivalent, measure inside diameter of parking brake drum portion of rotor. Set Gauge.
    Fig 2: Measuring Parking Brake Shoes
    GC0079873Courtesy of CHRYSLER LLC
    1 - BRAKE SHOE GAUGE
    2 - ADJUSTER STAR WHEEL
  3. Place Gauge (1) over parking brake shoes at widest point.
  4. Using adjuster star wheel (2), adjust parking brake shoes until linings on both park brake shoes just touch jaws on gauge.
  5. Install rear brake rotor. See Brakes/Hydraulic/Mechanical/ROTOR, Brake - Installation .
  6. Perform fine adjustment of parking brake shoes.
scientia non olet · About LEMON Manuals