Diagnostic Test

TEST FOR INTERMITTENT CONDITION
1. Turn the ignition on.
2. With the scan tool, record and erase DTCs.
3. Press the Seat Switch in all directions several times.
4. Wait one minute.
5. With the scan tool, read DTCs.
  Does the scan tool display B1D62-POWER SEAT SWITCH STUCK?
  
  Yes
  - Replace the Driver Seat Switch as necessary.
  - Perform POWER SEAT SYSTEM VERIFICATION TEST. See POWER SEAT SYSTEM VERIFICATION TEST .
  No
  - The conditions that caused this code to set are not present at this time. Using the appropriate wiring diagram as a guide, inspect the wiring and connectors.
  - Perform POWER SEAT SYSTEM VERIFICATION TEST. See POWER SEAT SYSTEM VERIFICATION TEST .