LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Locks (Service Information) >> TRANSMITTER, Integrated Key FOB >> Standard Procedure >> FOBIK Transmitter Battery Replacement >> FOBIK Without Battery Cover

FOBIK Without Battery Cover

Fig 1: FOBIK Without Battery Cover
GC0087710Courtesy of CHRYSLER LLC
NOTE: Do not disturb the metal terminal near the battery. Avoid touching the new battery. Skin oils may cause battery deterioration. If battery are touched, clean with rubbing alcohol.

This design is a clam shell design whereby both halves are split apart.

  1. Remove the valet/spare key from the FOBIK if present.
  2. Using a trim stick C-4755 or equivalent, carefully separate the top half from the bottom half.
    Fig 2: FOBIK Without Battery Cover - Separating Top Half From Bottom Half
    GC0087711Courtesy of CHRYSLER LLC
  3. Lift up on the battery to remove.
  4. Replace battery with the same type of cell.
  5. Install new battery negative side up.
  6. Snap the top and bottom halves together.
  7. Test FOBIK operation.