LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System (Service Information) >> WASHER, Headlamp >> Removal >> Removal

WASHER, Headlamp: Removal: Removal

Fig 1: Front Fascia, Washer Hose, And Washer Fitting
GC0095361Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Loosen front fascia as necessary on the side to be removed. Refer to Frame and Bumpers/Bumpers/FASCIA, Front - Removal .
  3. Disconnect washer hose (2) from headlamp washer.
  4. Remove headlamp washer from front fascia (1).
scientia non olet · About LEMON Manuals