LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> Standard Procedure >> Front Lamp Aiming >> Fog Lamp Alignment

Fog Lamp Alignment

A properly aimed front fog lamp will project a pattern on the alignment screen 100 millimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp.

Fig 1: Identifying Fog Lamp Vertical Adjustment Screw
GC0080102Courtesy of CHRYSLER LLC
  1. Turn the fog lamps On.
  2. Rotate the fog lamp vertical adjustment screw (2) on each lamp to adjust the beam height as required.
scientia non olet · About LEMON Manuals