LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Trunk Trim Panel - Removal >> Side Trim Panel

Side Trim Panel







REMOVAL

1. Open the trunk conventionally.
2. Remove the trunk rear trim Trunk Trim Panel - Removal.
3. Peel back the trunk weather-strip enough to free the side trim.
4. Free the side trim panel from the side of trunk area and maneuver the panel over the rear brackets.