LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Convertible L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Right Engine Mount

Right Engine Mount







INSTALLATION





1. Position right engine mount isolator (1).
2. Install engine mount isolator retaining bolts and tighten to 75 Nm (55 ft. lbs.).
3. Install engine mount bracket (2) and tighten bolts (3) to 68 Nm (50 ft. lbs.).




4. Remove jack.
5. Install power steering line support (3) at engine mount.




6. Install coolant reservoir (1).
scientia non olet · About LEMON Manuals