LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Reservoir >> Description and Operation >> Removal

Removal







REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Hoist vehicle.
3. Remove screws at the left wheel opening splash shield.
4. Remove the lower fascia push pins.
5. Remove upper bolts at ends (ears).
6. Disengage lower fascia to grille clips.
7. Pull away fascia as necessary to access reservoir (5).
8. Remove three reservoir (5) retaining bolts.
9. Lower reservoir from filler tube (7).
10. Remove the one retaining bolt at upper filler tube (7).
11. Maneuver filler tube (7) from engine compartment.