LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Actuators and Solenoids - A/T >> Shift Solenoid >> Service and Repair >> Installation

Installation







INSTALLATION





1. Install the solenoid/pressure switch assembly.
2. Install mounting bolts (1) at clamp plate (2) and tighten to 6 Nm (50 in. lbs.).




3. Connect the electrical connectors (1, 2) to the pressure control solenoid and line pressure sensors.
4. Install valve body Installation.
scientia non olet · About LEMON Manuals