LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Steering and Suspension >> Wheels and Tires >> Relays and Modules - Wheels and Tires >> Tire Pressure Monitor Receiver / Transponder >> Service and Repair >> TPM Transponder - Installation >> Rear

Rear







REAR





1. Position the transponder (1) and install the mounting nuts.
2. Connect the wiring harness connector (2) to the transponder (1).
3. Install the wheelhouse splash shield and all components removed to access it. Rear Wheelhouse Splash Shield - Installation
4. Perform the TPM Diagnostic Verification Test. Tire Pressure Monitor (TPM) Verification Test
scientia non olet · About LEMON Manuals