LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Tray >> Service and Repair >> Battery Tray - Removal

Battery Tray - Removal







REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the battery from the vehicle. Battery - Removal.
3. Remove the battery tray retaining fasteners (3).
4. Pull battery tray up far enough to disconnect the drain hose assembly.
5. Remove the battery tray (2) from the vehicle.