LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Brakes and Traction Control >> Traction Control Switch >> Service and Repair >> Installation

Installation







INSTALLATION





1. Install ESP Off switch (1) into transmission range indicator surround bezel (2).
2. Connect wiring connector (3) to ESP Off switch (1), then snap transmission range indicator surround bezel (2) into place on center console.
3. Install shift bezel. Console Shifter Bezel - Installation.
scientia non olet · About LEMON Manuals