Fog Lamp Bulb - Removal

FOG LAMP BULB





1. Open hood, disconnect and isolate the battery negative cable.
2. Reach up behind the front fascia (1) and disconnect the fog lamp electrical connector (2).

NOTE: On the PASSENGER SIDE it will be necessary to loosen the lower portion of the inner splash shield to gain access to the fog lamp bulb Front Wheelhouse Splash Shield - Removal. Pull down on the lower fascia/belly pan to gain access.

3. Twist the fog lamp 1/4 turn counterclockwise and pull rearward from fog lamp unit.

CAUTION: Do not touch the glass of bulb with fingers or other possibly oily surface. Reduced lamp life will result.