LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair >> Air Cleaner Housing - Installation

Air Cleaner Housing - Installation







INSTALLATION





1. Install the housing on the locating pin.
2. Install housing retaining bolt.
3. Connect the air inlet hose to the throttle body and tighten clamp.
4. Connect the air circulation hose to housing.
5. Connect the intake air temperature (IAT) sensor wiring harness connector.
scientia non olet · About LEMON Manuals