LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Belt Tensioner >> Service and Repair >> Removal and Replacement >> Timing Belt Tensioner & Pulley - Removal >> Tensioner Pulley Assembly

Tensioner Pulley Assembly







REMOVAL - TENSIONER PULLEY ASSEMBLY





1. Remove the timing belt. Timing Belt & Sprockets - Removal
2. Remove the timing belt tensioner pulley and bracket assembly by unscrewing the pivot bolt from the oil pump housing.
scientia non olet · About LEMON Manuals