LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Belt Tensioner >> Service and Repair >> Removal and Replacement >> Timing Belt Tensioner & Pulley - Installation >> Tensioner Pulley Assembly

Tensioner Pulley Assembly







INSTALLATION - TENSIONER PULLEY ASSEMBLY





1. Install the timing belt tensioner pulley (1) assembly. Tighten the pivot bolt (2) to 61 Nm (45 ft. lbs.).
2. Install the timing belt. Timing Belt & Sprockets - Installation
scientia non olet · About LEMON Manuals