LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Left Engine Mount

Left Engine Mount







INSTALLATION





1. Install engine mount to bracket. Tighten nut to 101 Nm (75 lbs. ft.).
2. Install left mount to the engine block. Tighten bolts to 54 Nm ( 40 lbs.ft.).
3. Lower vehicle.
4. Remove the engine support fixture.
5. Raise and support the vehicle.
6. Install both of the engine mount to cradle nut. Tighten nut to 101 Nm (75 lbs. ft.).
7. Lower vehicle.
8. Install radiator fan assembly Radiator Fan - Installation.
9. Install the engine cover.
10. Connect the negative battery cable.
scientia non olet · About LEMON Manuals