LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Spring >> Service and Repair >> Removal and Replacement >> Valve Springs - Removal >> Cylinder Head On

Cylinder Head On







REMOVAL - CYLINDER HEAD OFF

1. Compress valve spring with valve spring compressor C-3422-D and adapter 6526 Tools and Equipment.
2. Remove valve retaining locks. Release valve spring compressor. Remove valve spring retainer and valve spring.
3. Remove valve stem seal assembly. Valve Guide Seals - Removal
scientia non olet · About LEMON Manuals