LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Power Seat Switch - Installation >> Passenger Seat

Passenger Seat







INSTALLATION

1. Position the seat switch onto the door trim panel. Press into place ensuring all four clips are engaged.
2. Reconnect the wire harness connector to the door module.
3. Install the front door trim panel. Front Door Trim Panel - Installation.
4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals