LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Body and Frame >> Fender >> Front Fender >> Front Fender Liner >> Service and Repair >> Silencer >> Installation

Installation







INSTALLATION





1. Insert silencer between cowl side and fender, forward of wiring, connector and brackets.
2. Push silencer rearward until setting to trim edges of body door hinges (upper and lower) and center fender mounting bracket.
3. Install front wheelhouse splash shield. Front Wheelhouse Splash Shield - Installation.
4. Install front wheel.
5. Remove safety stands and lower vehicle, as necessary.
scientia non olet · About LEMON Manuals