LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Latch >> Service and Repair >> Liftgate Latch - Removal

Liftgate Latch - Removal







REMOVAL





1. Remove liftgate trim panel.
2. Disengage outside handle link from clip on latch.
3. Disconnect wire connector from liftgate latch.
4. Remove screws attaching latch to liftgate.
5. Remove latch from vehicle.