Rear Bumper Reinforcement Bracket - Installation

INSTALLATION





1. Place left reinforcement bracket into position.
2. Install two screws (2) attaching reinforcement bracket (1) to the body.
3. Tighten screws to 95 Nm (70 ft. lbs.) torque.




4. Place right reinforcement bracket into position.
5. Install two screws (2) attaching reinforcement bracket (1) to the body.
6. Tighten screws to 95 Nm (70 ft. lbs.) torque.
7. Install rear bumper reinforcement Rear Bumper Reinforcement - Installation.
8. Install rear fascia. Rear Fascia - Installation.