LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Front Bumper Reinforcement >> Service and Repair >> Front Bumper Reinforcement - Installation

Front Bumper Reinforcement - Installation







INSTALLATION





1. Place front bumper reinforcement (3) into position on vehicle (2).
2. Install the three bolts (1) attaching front bumper reinforcement to frame rail and tighten to 20 Nm (15 ft. lbs.).
3. Install front bumper fascia. Front Fascia - Installation.
scientia non olet · About LEMON Manuals