LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Installation

Installation







INSTALLATION





1. Position the Park Assist Module (1) and install the two attaching screws (2). Tighten screws to 3.5 Nm (30 in. lbs.).




2. Connect the Park Assist Module electrical connector (1).
3. Install the left quarter trim panel Console Shifter Bezel - Installation.
4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals