LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Radio/Stereo >> Service and Repair >> Removal and Replacement >> Radio >> Installation

Installation







INSTALLATION





1. Connect wire harness connector and antenna cable to back of radio.
2. Position radio into instrument panel.
3. Install mounting screws. Tighten to 2 Nm (22 in. lbs.).
4. Install instrument panel center bezel Instrument Panel Center Bezel - Installation.
5. Connect battery negative cable.
scientia non olet · About LEMON Manuals