LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Collision Avoidance and Parking Assist Systems >> Parking Assist Distance Sensor >> Service and Repair >> Park Assist Sensor - Installation

Park Assist Sensor - Installation







INSTALLATION





1. Position the Park Assist Sensor (3) over the retaining bezel (2) and firmly snap into place.




2. Connect the electrical connector (2).
3. Install the rear fascia Rear Fascia - Installation.
4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals