Removal

REMOVAL





WARNING: On vehicles equipped with airbags, refer to Restraints before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.

1. Disconnect and isolate the battery negative cable.
2. Remove glove box.
3. Disconnect instrument panel antenna cable from antenna cable.
4. Disconnect cable hanger clip from HVAC unit.
5. Remove radio Removal.

CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.

6. Disconnect the antenna cable by pulling the locking antenna connector away from the radio.
7. Remove cable from vehicle.