LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Brakes and Traction Control >> Lateral Accelerometer >> Service and Repair >> Installation

Installation







INSTALLATION





1. Install the yaw rate/lateral acceleration sensor (1). Tighten the nuts to 10 Nm (89 in. lbs.).
2. Connect the yaw rate/lateral acceleration harness connector.
3. Install the rear center console. Center Console - Installation.
scientia non olet · About LEMON Manuals