LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Seat Temperature Switch >> Service and Repair >> Heated Seat Switch - Removal

Heated Seat Switch - Removal







REMOVAL

WARNING: REFER TO RESTRAINTS BEFORE ATTEMPTING ANY DOOR, SEAT, STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

NOTE: The Heated Seat Switches and the Heated Seat Control Module are integral and serviced together.





1. Disconnect the negative battery cable.
2. Remove the center console interior trim panel.Center Console - Removal.
3. Disconnect the heated seat switch harness connectors (1).
4. Press the locking tabs inward and remove the heated seat switches from the interior trim panel.