LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Hazard Warning Switch >> Service and Repair >> Installation

Installation







INSTALLATION





1. Insert the hazard switch (1) into the center console cover (2) and press to engage the locking tabs.




2. Install the outer gang of switches into the center console cover and press to engage the locking tabs.
3. Connect the center console switch harness connectors.
4. Install the center console cover. Center Console - Installation.
5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals