LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner - Removal

Accessory Drive Belt Tensioner - Removal







REMOVAL





1. Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.




2. Remove the accessory drive belt. Accessory Drive Belt - Removal.
3. Remove the pulley from the accessory drive belt tensioner.




4. Remove the belt tensioner retaining bolts (1) and the belt tensioner (2).
scientia non olet · About LEMON Manuals