LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Removal and Replacement >> Hydraulic Lifters - Removal

Hydraulic Lifters - Removal







REMOVAL

1. Remove the appropriate Cylinder Head Cover. Cylinder Head Cover - Removal
2. Remove the Camshaft Bearing Bridge Assembly. Removal




3. Separate the lifter from the rocker arm using a 2mm drift to press the hydraulic lifter out of its bore.
scientia non olet · About LEMON Manuals