LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Removal and Replacement >> Hydraulic Lifters - Installation

Hydraulic Lifters - Installation







INSTALLATION





1. Position the compensation disc (1) into the lifter bore.
2. Push the hydraulic lifter (3) into the lifter bore of the rocker arm (1) until it is firmly in place (until the locking ring snaps into place).
3. Install Camshaft Bearing Bridge assembly onto the cylinder head. Installation
4. Install the Cylinder Head Cover. Cylinder Head Cover - Installation
scientia non olet · About LEMON Manuals