LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Hood >> Hood Latch >> Service and Repair >> Hood Latch Striker >> Installation

Installation







INSTALLATION





1. Install the latch striker (1) to the hood.
2. Install the two bolts (2) attaching the latch striker (1) to the hood. Tighten to 10 Nm (88 in. lbs.).
scientia non olet · About LEMON Manuals